We also posted a series of really cool videos which describe some techniques we use when building Gizmos as well as explain some tips that might be useful when soldering or designing electronics. The entire video was 30min long so we had to break it down into many smaller pieces to be able to upload it faster. Below is the first part of the 5 part series. You can find the rest in our Group in the Community section.

Blogs

There was a question posted from one of our members regarding the way we work when designing new devices. We thought it would be best if we write an article about it instead or just answering the question. Check it out when you have time. we describe the basic steps that are used in every design and may help you when developing new ideas.

If there are opinions or ideas of your own that you would like to write about then the BLOG section as well as the rest of our website is open to all of our members and you can add your own content anywhere you like. We would be only happy to see new and fresh ideas and articles on our website to help others in the same field of work.

We also posted allot of cool images which show the internal Motherboard of FLOW G1.5 so if you have any questions about it or wanted to see how it looks inside then you can check out these images in the FLOW Group in our community section. We have made allot of images in closeup as well as from above so that everyone can get a good idea about the internals of the device. Have in mind that these pictures do not show the 3mp camera and the Digital compass which we just announced above.