• Ilios HD Complete Kit

    Get the best equipment for your application with an affordable price. Begin building mechanically accurate and highly detailed objects in no time.

    The Ilios HD Kit was initially designed for mechanical applications, where precision and reliability matters the most. In its assembled form it can produce stunning results with the help from its highly accurate motion construction and electronics. The Ilios project utilizes the technique of Stereo-lithography or SLA as it is commonly known. The build uses photo reactive resin, which is cured when light is projected on it. The lifting platform, lifts each layer of the model and finalizes with a complete product at the end of the build. One of the benefits this technique has is the highly detailed result, which simply cannot be matched by machines that use plastic extrusion methods. Additionally there is a large selection of materials that can be used, which simulate results such as ABS, Rubber and many others, combined with a color mixture of your choice, in both Opaque and Translucent options.

    Buy Now!
    Selectable Projection Mounts
    Large & Versatile Build Area

  • FliteTest Interview

    FliteTest was kind enough to talk to Demetris (Creator of the OSRC System) about the features of the system and at the same time answer some of the questions that were gathered throughout the RC community. Chad and Josh talk about features such as RF Cloud, modularity of the whole system and why it was important to have these and many other unique features in a single project.

    Although the video does not fully explain all features, it gives a great opportunity to meet Demetris and get an overall idea about the history of the project and its future through the eyes of the creator.

    Feel free to browse through other videos on the OSRC YouTube channel to find out more about the system or head to the Forum with your own questions or suggestions.

    Don't forget to check out the OSRC Facebook site as well, where many news and daily updates take place while working on different features of the system. Post your comments there as well, like the site and contribute to the effort.



  • Detailed Description

    In this video the designer of the OSRC (Open Source Remote Control) system goes through all major features and talks about the benefits they hold. The video was mainly created to address most of the questions that gathered through the OSRC as well as other forums, comments on YouTube, E-mails and other social media.

    Although it was impossible to describe the entire system in a single video, most functions, hardware accessories and the over all details are described in this presentation, giving a more complete understanding of how the OSRC system works and why it is important.

    You can read more about specifications and features each module of the system has in the Products section of the website. For more videos don't hesitate to visit the OSRC YouTube channel.




Previous
Next
Video, Documentation, Shipping and More! 1

  • Video, Documentation, Shipping and More!

    Seasons ModelAt-last, the hard part is behind us. The Ilios machine produced its first results. The initial build, seen in this image was a test not only for the functionality of the machine but also for its endurance since during the build there were lots of tests done, like adding weights to the build lift, messing with the motors and doing stress tests while the machine was working. Needless t

    Read more...
3D Printing and the Shop! 2

  • 3D Printing and the Shop!

    Lovingly holding on to my creationFinally after many days in testing and development i can now proudly say that our Ilios HD machine is working. Although the last component for our first build hasn't arrived yet (PDMS for the Vat surface), all mechanics operate flawlessly and i even did a test print with the projector setup mentioned in our Facebook page.

    Read more...
From a Design to Reality 3

  • From a Design to Reality

    Things that shall be used to build the 3D printerAt last all the parts needed for the 3D printer build arrived. It took some time for the main components (mechanics) to get here but once i received the crate, it became clear why. The package weighed over 280kg and was very nicely sealed in a wooden crate. All the aluminum extrusions, spindles, fastening hardware

    Read more...
Working & Waiting 4

  • Working & Waiting

    Demetris holding a projectorAlthough things may seem to have gone quiet, after the IndieGoGo campaign finished, a lot of things have been happening behind the scenes and on the website. First off, few days after the campaign was funded, all parts have been ordered. I am happy to say that the last projectors shall be picked up on Monday (25/02/2013) since

    Read more...

Working & Waiting

Share

Demetris holding a projectorAlthough things may seem to have gone quiet, after the IndieGoGo campaign finished, a lot of things have been happening behind the scenes and on the website. First off, few days after the campaign was funded, all parts have been ordered. I am happy to say that the last projectors shall be picked up on Monday (25/02/2013) since not all were ordered from the same place. I have been informed that the mechanical parts for the Ilios 3D printer shall be shipped within the upcoming week, since they needed some machining on the spindles and the extrusions them selves. It is a killer to sit around and wait for the parts to arrive, i know, but once everything is here, work shall pick up really fast and should be quite exciting.

While i am waiting for the parts to arrive, i begun translating the website to Russian and Greek (as you may have noticed from the icons on top of the website). Many have been requesting for this feature for quite some time now and as always i am more than happy to help. All translations are written by hand (none of that automated stuff) and hopefully coherent enough for others to read. If you see a problem on the site in one of the above mentioned languages then please don't hesitate to mention it in the forum and i shall fix it right away.

Here i am, working on my fenceAs was mentioned in the campaign, i wasn't looking to get rich by the collection of funds but make an actual machine to work with, thus barely no additional cost was added to the price of the perks. Whatever funds were left i already spent on some good equipment to cut the aluminum extrusions and be able to drill them precisely. I shall post some pics of the equipment on the FaceBook page. Although i worked before with pretty much every common material and have tools to do household work like everyone else, never had the need to have a cutting wheel before nor a drill stand, so it was interesting to see how much those power tools actually cost.

For now these are all the news. I shall definitely be posting more once everything arrives so make sure to monitor the FaceBook page and Twitter for daily updates and progress. Don't forget to read the Donation article and find out how you can help the project.

Written by Demetris Zavorotnitsienko

You have no rights to post comments. Please Login or Register

Latest Blogs

  • snapshot.jpg

    Seasons - The story behind it

    I always liked the unusual design and something unique and one artist in particular was working with this style. Taron, a well known artist in the CG industry created many art pieces in 2D as well ...

    Read more
    by Demetris Zavorotnitsienko
    Thursday, 25 April 2013

  • Ilios HD SLA 3D Printer Build

    Based on the successful campaign on IndieGoGo to raise funds for an HD SLA 3D printer i shall be describing the build process of the first unit in this blog so that others can see it, comment on it an ...

    Read more
    by Demetris Zavorotnitsienko
    Thursday, 07 February 2013

  • OSRC Development & Manufacturing

    Current Status & Availability With the help from 3D Systems and enough equipment to manufacture in the workshop, by hand, at-least tens of units at a time, i am redesigning some aspects of the ...

    Read more
    by Demetris Zavorotnitsienko
    Wednesday, 07 November 2012
  • what-suits-you.jpg

    Which configuration suits you best

    Due to the modular nature of OSRC, the possibilities while combining different modules, become endless. Each module has its purpose and can add features related to many different fields. Sometimes the ...

    Read more
    by Demetris Zavorotnitsienko
    Tuesday, 06 November 2012
  • Ui_model_timer_list.png

    Timer Settings

    Unlike known timers, found on older RC units, OSRC provides the operator with the ability to control many more functions through its timers and activate multiple timers simultaneously while in flight. ...

    Read more
    by Demetris Zavorotnitsienko
    Tuesday, 06 November 2012
View more blog entries
12345

Latest Forum Posts

Latest Comments

  • 9 - Electronics Assembly
    OSFlyerWiz 1 week ago
    Glad you like the idea. Hope to have you as a customer soon :)
     
  • 9 - Electronics Assembly
    Lehoi 1 week ago
    Thanks for the quick answer. Good news about the controller. I am sure you understand my concerns.
     
  • 9 - Electronics Assembly
    OSFlyerWiz 1 week ago
    Dear Jorge, I didn't have any problems with the board if it is set up as described. As you shall see ...

Twitter Feed

Facebook Feed

License

Creative Commons License

 

OSRC by rdGizmo For You LTD is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License

Supported By